Ubiquiti Networks airGrid M5 HP Guide De Démarrage Rapide page 7

All manuals and user guides at all-guides.com
4. Lift the locking tab of the cable feed door and detach the
door from the Rear Housing.
5. Route an Ethernet cable from a powered switch (24V)
through the Rear Housing and Feed Extender. Connect the
cable to the Ethernet port on the back of the Antenna Feed.
6. Attach the Antenna Feed:
a. Rotate the Antenna Feed to match the signal polarization.
b. Insert the Antenna Feed into the Feed Extender, and push
until it locks into place with a click.
Vertical Polarization Horizontal Polarization
5