Publicité
Les langues disponibles
Les langues disponibles
Re-assembling the appliance
1. Fit the food bowl (D) so that it
locks with the Hub (E) located in
the feeder base (F).
IMPORTANT: The Feed Bowl has
three location tabs. Two large
tabs and a small location tab. If
the feed bowl location tabs are
not aligned the feed bowl will
not locate correctly.
2. Place the Inner feeding trays
All manuals and user guides at all-guides.com
3. Fit the slide cover (C) onto the
4. Fit the inner bowl (B) onto the
5. Secure the Bowl cover (A) onto
into the food bowl (D) this is
optional.
top of the food bowl (D).
feeder so that it locks with the
slide cover (C).
the appliance by lining up the
fittings.
Publicité
