Publicité
Warning: Only use the plasma filter in combination with an extractor unit with metal
grease filters. Always ensure that the plasma filter is in a location with good oxygen
supply and good permanent ventilation.
-Touch the sensor buttons gently on the control panel on the extractor to operate this
appliance.
-To achieve better air extraction, it is advisable to switch on the extractor hood a few
minutes before starting to cook and leave it on for approximately 15 minutes after cooking
or at least all cooking smell is completely removed.
-The plasma filter uses a sensor switch that reacts to the air flow from the extractor hood.
When the extractor hood is switch ON, the air pass through a sensor to activate the plasma
filter automatically. It may take approximately 20 to 30 seconds to activate the plasma filter
depending on the type of extractor hood.
-The indicator lamp on the plasma filter will light up and an audio signal will sound to
indicate that the plasma filter is now switch ON.
EN-21
Publicité
