Power Mgmt
Configure to go to standby mode automatically during in the menu or/ and
without Wifi signal.Choose the power management timer ( 5/15/30mins) to set
the duration of the radio to switch standby mode automatically when you are
not controlling it.Choose Turn off to ignore the power management function.
Sleep Timer
Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes.Once the
time is set,there will be a bed icon with remaining minutes at the top right
corner and the device will turn to standby then .Press Sleep on the remote
control for the shortcut of this function.
Buffer
Configure the buffer time of the music playback,2/4/8 seconds.
Weather
Activate/deactivate the weather forecast for the standby display.Choose your
preferred temperature unit (℉ or ℃) and then proceed entering your location.
When activated, the weather forecast is shown in turns with the clock display
on the standby screen (each 10 secs).
Local Radio Setup
There is a shortcut Local Radio under Internet Radio so that you can easily go to
the station list of your location.You may Manual Setup your location, or let the
system Auto Detect your current location.The system detects the location
according to the IP address of your connected network. Press Local Station to
enter this local radio list directly.
Playback Setup
Select the playback mode of media center-Off ( no repeat or shuffle),Repeat all,
Repeat one,or Shuffle.
Device
Default device name for DLNA is "AirMusic".You may rename it for DLNA setup
on the PC or mobile.QR code for downlode and install "AirMusic" control App.
Equalizer
Default equalizer is Normal, you may change to Flat, Jazz, Rock, Soundtracks,
Classical, Pop, or News.Press EQ on the remote control to swap among the EQ
mode for shortcut.
Resume When Power On The system is default to resume internet radio playback if you were
listening to internet radio or media center before switch off the unit.If turn this
setting off, the system will remain in the main menu when switching on the unit.
Software Update
Update software. If there is an updated software version on the server,the
system will notify you .Before starting a software upgrade,ensure that the unit
is plugged into a stable mains power connection.Disconnected power during a
software update may permanently damage the unit.
All manuals and user guides at all-guides.com
Internet Radio
IRW850
User Manual