Hansol Electronics D19AL Mode D'emploi page 5

Installation / Controls
Pin assignment table D-Sub Mini 15pin connector
Pin No. Assignment
1 Red Video
2 Green Video
3 Blue Video
4 Frame Ground (brown)
5 Ground (blue)
6 Red Video Ground
7 Green Video Ground
8 Blue Video Ground
9 N.C
10 ID (green)
11 N.C
12 SDA (orange)
13 H-Sync (black)
14 V-Sync (yellow)
15 SCL (red)
Function of controls
OSD Controls
The OSD apears on the screen when you press MENU (
"ON SCREEN MENU" controls include the following extended controls such as Size, Position,
Geometry Distortion, Color temp, Degauss, Moire on & off, Language, OSD-Position, Recall,
Cont & Brt, etc.
Function of OSD buttons on the front of the monitor
8 User's Manual
All manuals and user guides at all-guides.com
The 15-Pin D-sub connector (male)
of the signal cable (IBM Systems)
1 5
10
6
11 15
(15 Pin D-Sub)
) button.
Additional front controls
Power Switch : Turn the monitor power on or off, When the power is on, the LED is lit.
Accessing OSD
Press MENU( ) Button.
: Direct Brightness access.
: Direct Contrast access.
EXIT from OSD
: Press this ( ) button in the main menu and submenu.
OSD Menus
Main Menu
OSD main menu allows you to adjust user controls.
Position Size
OSD position Color-Temp
Use the / : Control buttons to scroll through all of the menus.
Main Menu control guide
: Exits the OSD controls.
/ : Move the function to choose.
: Proceed to the selected menu.
Controls
Geometry Moire Language
Degauss Recall Zoom
User's Manual 9