AUX FREEDOM Serie Manuel D'installation Et L'utilisauter page 127

OPERATION
Automatic operation mode
1. Press the "MODE" button, select the automatic operation mode.
2. By pressing the "SPEED" button, you can select the fan speed from LOW, MID,
HIGH, AUTO.
3. Press the "ON/OFF" button, the air-conditioner starts to operate.
4. Press the "ON/OFF" button again, the air-conditioner stops.
Note: In the Automatic operation mode the temperature settings is non-effective.
Cooling/Heating operation mode
1. Press the "MODE" button, select the Cooling or Heating operation mode.
2. By pressing the "▲"or "▼"button, you can set the temperature the display changes
as you touch the button.
3. By pressing the "SPEED" button, you can select the fan speed from LOW, MID,
HIGH, AUTO.
4. Press the "ON/OFF" button, the air-conditioner starts to operate.
5. Press the "ON/OFF" button again, the air-conditioner stops.
Fan operation mode
1. Press the "MODE" button, select the fan operation mode.
2. By pressing the "SPEED" button, you can select the fan speed from LOW, MID,
HIGH.
3. Press the "ON/OFF" button, the air-conditioner starts to operate.
4. Press the "ON/OFF" button again, the air-conditioner stops.
Note: In the fan operation mode the temperature settings is non-effective.
Drying operation mode
1. Press the "MODE" button, select the drying operation mode.
2. By pressing the "▲"or "▼"button, you can set the temperature the display changes
as you touch the button.
3. By pressing the "SPEED" button, you can select the fan speed from LOW, MID,
HIGH, AUTO.
4. Press the "ON/OFF" button, the air-conditioner starts to operate.
5. Press the "ON/OFF" button again, the air-conditioner stops.
Backlight function (for remote controllers with such function only)
The remote controller has a backlight which can be turned on by pressing any button
for the convenience of operation in darkness. The backlight will be automatically
turned off if there is no operation within 10 seconds.
127
3