Num'axes ORE1068 Guide D'utilisation page 19

Before using your earplugs, please put the accessories in place. Follow the diagram below:
1. Place the silicone earplugs caps on your ear plugs in the right direction: R=right and L=left, so that
the contacts of your earplugs are visible.
2. Then place one end of the anti-loss cord on the stem,
3. And finally place the foam in-ear tip on the stem by sliding it as far as possible.
These earplugs should not be used where there is a risk that the retention cord could be caught up during
use.
Putting the earplugs in place
Earplugs must be fitted, adjusted and maintained in accordance with the manufacturer's
recommendations. If you fail to follow these recommendations, the protection offered by your earplugs
will be seriously compromised.
Before anything, make sure the earplugs are turned off. Follow the diagram below:
ORE1068– ind B – Novembre 2023 19/60