Publicité
Les langues disponibles
Les langues disponibles
Installation
All manuals and user guides at all-guides.com
1.
en
2.
3.
Only seal the radio add-on module after successful start-up!
4. Push the seals on the module to the screw head.
Shortly after placement, the module will set up a connection with the cal-
culator unit via the optical interface and read out the device information
from the heat meter. Successful connection is displayed on the meter
as follows:
"FS" = Identifier for S-mode
X X Y Y Y
"FC" = Identifier for C-mode
Registration in the radio network
Starting installation telegrams
Installation telegrams are triggered after the module has been placed on
the heat meter by means of:
• Service software Q suite 5 in conjunction with
infrared communication head WFZ.IrDA-USB or
• programming stick WFZ.PS
Align the WFZ.IrDA-USB or WFZ.PS to the IrDA interface of
the radio add-on module.
The installation process is shown on the heat meter display by means of
the current installation step ("Inst 8" to "Inst 1").
18
FUM5-00MO-DES-RHMHE
Remove the interface cover on the meter
Set the module in place
Screw the module in place using the two screws provided
X X Y Y Y
Software version
X X Y Y Y
08.09.2017 / V1.0
Publicité
