Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Cleaning
• Never use anything flammable to clean the shredder. This may result in serious injury or damage
to the product.
• Always unplug the shredder before cleaning!
• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.
• Do not clean or immerse the shredder in water. Getting the unit wet may result in damage
or malfunction to the electrical components. If the shredder happens to get wet, be sure to
completely dry the unit immediately with a cloth or towel.
Troubleshooting
If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you
continue to have problems, contact customer support at our Service Center.
Do not attempt to repair by opening the shredder head. This will completely void the product warranty.
Problem
The shredder does
not work at all.
12
Solution
• Make sure the unit is plugged in and that the outlet is in good working
order.
• Overheating with extended use: In the event that the shredder has
shredded continuously beyond the maximum running time and overheats,
the unit will automatically shut off. If this happens, switch the shredder off
for 30 minutes or longer before resuming normal operation.
• Shredders with pull-out waste baskets feature a safety power cut-off
upon basket removal. Shredder will not function unless the pull-out
wastebasket is pushed in all the way and properly set back into place.
• If using a plastic bag to line the wastebasket, please remove it. This may
cause the shredder not to operate properly.
• The activation sensor of the shredder is located near the center of the
feed slot. Be sure to feed directly into the center area to activate the
machine (especially applies to smaller pieces of paper or credit cards).
• When the "Basket is Full", the LED status indicator will indicate it
needs to be emptied. While on, the shredder will be inoperable until
the wastebasket is cleared.
Publicité
