Publicité
All manuals and user guides at all-guides.com
Chapter : Connect the Swtch
Connection Instructions
1 .
Make sure all of the devices you will connect to the Switch are
powered off .
2 .
Connect a Category 5 Ethernet network cable to one of the numbered
ports on the Switch . Connect the other end to a computer or other
network device .
3 .
Repeat step 2 to connect additional devices .
4 .
Connect the supplied power cord to the Switch's power port . Plug
the other end of the adapter into an electrical outlet .
5 .
Power on the devices connected to the Switch . Each active port's
corresponding LED will light up on the Switch .
Congratulations! The installation of the 10/100 Switch is complete.
10
Connect the Ethernet Network Cable
16-Port and 24-Port 10/100 Swtches
Publicité
