• Touch the +/- buttons on the touch screen of the unit or press the < < /
remote control to adjust the MINUTES of the ALARM TIME. Touch the SET button on the touch
screen of the unit or press the ENTER button on the remote control to confirm the minute setting,
the unit will then enter into the AUDIO SOURCE setting.
NOTe: You have 8 seconds to make your changes or unit returns to default setting.
• You have three options for the ALARM AUDIO SOURCE:
Touch the +/- buttons on the touch screen of the unit or press the < < /
remote control to make your selection. Touch the SET button on the touch screen of the unit or press
the ENTER button on the remote control to confirm the ALARM AUDIO SOURCE setting. The unit
will then enter into the VOLUME SETTING.
• Touch the +/- buttons on the touch screen of the unit or press the < < /
remote control to adjust the ALARM VOLUME. Touch the SET button on the touch screen of the unit
or press the ENTER button on the remote control to confirm the volume setting. The alarm settings
are complete and the unit will now be in NORMAL MODE.
CANCELLING THE ALARM:
There are two ways to stop the alarm when it is ringing:
• Press the
button on the remote control.
• Touch any button twice on the touch screen or the remote control.
SNOOZe:
• Touch any button on the touch screen or press any button except the standby button on the remote
control once, the alarm will stop ringing and the unit will enter into SNOOZE mode. The SNOOZE,
BUZZER and ALARM icons will flash on the LCD screen. When the unit is in SNOOZE mode, the alarm
will stop ringing for 9 minutes, then the alarm will resume.
DISPLAY MODe:
• Press the DISPLAY MODE button on the remote control to select the LCD display mode. This
function is to set the duration of the LCD backlight. There are three settings for the LCD backlight as
shown below:
All manuals and user guides at all-guides.com
OPeRATION
BUZ
RAD (FM/AM)
ON
30 (seconds)
- 17 -
<
<
buttons on the
iPod
<
<
buttons on the
<
<
buttons on the
OFF