YBA WA202 Livret D'utilisation page 8

Design WA202 Stereo Receiver
Using your YBA remote control
USE OF REMOTE
Point your remote control to the IR receiver located in the display window of your WA202
Note that PRESS means a short press on a key while HOLD means to keep the key pressed for more than
three seconds.
0 Select the device you want to control between AMP, CD
WA202, you need to select AMP button. Note: AMP will remain the active function
0
until you select another device.
1 SOURCE SELECTOR Press this key to cycle between the five inputs
CD
1 2
2 VOLUME SELECT Press - to decrease volume / press + to increase volume
VIEW Hold (> 3 seconds) to turn the display on or off
3
When the WA202 is in Tuner mode, pressing VIEW will change the RDS information. Your
WA202 can display station name, clock or text messages but will work only if the station
has RDS transmission and the signal is sufficiently strong. Display information varies
according to station preferences.
4 MENU When in Tuner mode press Menu to toggle between AM and FM
3
FCT Hold > 3 seconds to store the current volume level
5
4
When in tuner mode press to cycle between tuner functions
5
Preset
6
LEFT AND RIGHT ARROWS When in TUNER mode use the left and right arrows to skip
6
7
to the previous or next memory location
8
7
OK When in TUNER mode press OK to store the current frequency into memory
9
See Storing Radio Stations section on Page 5 of this manual
10
8
MUTE Press to mute Press again to exit mute
9 UP AND DOWN ARROWS When in TUNER mode use these arrows to manually tune the
frequency
AUDIO Press to restore stored volume level
10
RDS
RDS is a method used for the transmission of additional information from local radio stations. It is only available
when in FM and is optional. RDS will only work if the local broadcasting stations have RDS transmission and if
the signal is strong enough. We therefore strongly recommend the use of a proper FM aerial to increase the
chance of receiving RDS information.
RDS information varies from one broadcasting station to another and can include PS (Present station name),
RT (Radio text such as a current playlist or news) and CT (Clock/Time). Your WA202 will automatically display RT.
If this is not available it will display PS information. If this is not available then it will display the frequency. By
pressing VIEW on your remote it is possible to change this information between PS, RT, CT and frequency.
Page 8
All manuals and user guides at all-guides.com
Video Aux iPod Tuner
Seek Tune Autoset
www.ybahifi.com
and AUX. To control the
CD
RDS Volume Preset