Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
KPS-TL10 • Digital earth resistance tester
2. SAFETY NOTES
- To avoid electrical shock, remove test leads before opening case.
- Do not exceed 200 V AC in 3 phase tester.
- Do not apply voltage across COM and OHM terminals.
WARNING
To avoid electrical shock or damage to the meter, do not get
water inside the case.
3. SPECIFICATIONS
Measurement system:
Earth Voltage:
Earth Resistance:
Accuracy:
Safety standard:
Low battery indication:
Data hold indication:
Over range indication:
Timer (auto power off):
Display:
Power source:
Dimensions:
Weight:
Accessories:
Test leads (red – 15M, yellow – 10M, green –
5M), Auxiliary Earth Bars Heavy Case,
Instruction Manual.
7
Earth Resistance by constant current
inverter. 820Hz, 2mA approx.
0-200 V AC, 40-500 Hz.
Range and resolution
0-20 ohm (0.01 ohm)
0-200 ohm (0.1 ohm)
0-2000 ohm (1 ohm)
Earth voltage +/- (1%rdg + 2dgt)
Earth resistance +/- (2%rdg +
2dgt) or +/- 0.1 Ω, which is grater
IEC-1010 (EN 61010), installation
category III
"B" symbol appears on the display.
"DH" symbol appears on the display.
"1" (MSD).
About 3-6 minutes.
LCD 3 1⁄2 digit (2000 counts)
(R6P) 1.5Vx6 pieces dry batteries.
163 (L) x 100 (W) x 50 (D) mm.
Approx. 800g. (battery included)
Publicité
