Publicité
Les langues disponibles
Les langues disponibles
1. Follow cleaning instructions 1-4 above. Make sure to disassemble and clean fan before storing.
2. Retain the original packaging to store your fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or put any stress on the cord where it enters the fan as it could cause the cord
to fray or break.
If your fan fails to operate, please follow these procedures prior to contacting customer service:
PROBLEM
Fan is not turning on.
Oscillation function is not
working.
Fan is on but air coming out of it
is not strong enough.
If the problem still persists, refer to the warranty. For further instructions, call 1-800-268-7622 or
visit
www.super-electric.com
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD VOID THE
WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.
Airworks
12MDWA
STORING YOUR FAN
TROUBLESHOOTING
PROBABLE CAUSE
A. Fan is not plugged into a
120V AC, 60Hz polarized
outlet/receptacle.
B. Breaker/fuse has been
tripped.
The oscillation pin has not been
activated.
There is dust built up at the back
of the fan.
with the model number of this fan ready for the service center.
SOLUTION
A. Ensure unit is in the OFF position. Plug
in unit and attempt to turn on again.
B. Please check your electrical box to
confirm the breaker has not been
blown. Ensure unit is in OFF position.
Plug in unit and attempt to turn on
again.
Attempt to plug unit in another
receptacle in the house.
Simply pull press the oscillation pin down
to start the oscillation function. This can be
done while the fan is operating.
Turn fan OFF and unplug. Using a soft, dry
cloth, wipe the back of the grille to remove
any dust build-up. Plug in unit and turn fan
back ON to resume normal operation.
6
Publicité
