audiophony CR25A-COMBO Guide De L'utilisateur page 21

250W B
CR25A-COMBO -
4 - 8 : Optional headband transmitter system:
1 2
0dB
INPUT
MIC -10dB
6
1
®
luetooh sound system With
4
STANDBY
ANT
ON OFF
3 5
7
3
usB/sd
player and
1 - Jack 3.5 input to connect the microphone
2 - Input level selector. MIC is the standard configuration for
the headband microphone. You can switch to the 0dB or -10dB
positions if you want to use another type of microphone.
3 - ON/STANDBY/OFF power switch. The middle position allows
you to cut the microphone without interrupting the HF signal.
4 - Battery level indicator.
The indicator flashes in red when the batteries are discharged.
The indicator flashes in red when the ASC function is activated.
5 - Flexible antenna.
6 - Synchronisation IR diode. The ASC (Auto Synchro
Connection) function allows you to synchronise a chosen
channel between the transmitting microphone and the receiver
via InfraRed transmission.
To do so, select a channel (from 1-16) on the receiver. Press the
ASC button and put the IR diode of your microphone in front of
the IR diode (#9) of the receive
7 - Batteries compartment: LR06 x 2. Please make sure you keep
the same polarities if need to replace the batteries.
1 - Connector to plug the bodypack transmitter.
Plug the headband microphone into the Jack #1
socket of the transmitter.
2 - Headband. Set the mic position in order for
the capsule to be slightly below your mouth.
2
3 - Capsule. Transforms the sound pressure into
a signal.
2
uhf handheld mic
English
Page 21