Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION:
Read and follow all instructions before operating fan.
Do not use fan if any part is damaged or missing.
WARNING:
To reduce the risk of fire or electrical shock, do not expose to water or rain.
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
This appliance has a 3-prong plug. To reduce the risk of electrical shock, this plug is intended to fit in an outlet only one way.
If this does not fit the outlet, contact a qualified electrician. Do not attempt to bypass this procedure.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to
avoid a hazard.
RULES FOR SAFE OPERATION:
Never insert fingers or any other objects through the grille guard when fan is in operation.
Disconnect the fan when moving from one location to another.
Disconnect the fan when removing guards for cleaning.
Be sure fan is on a stable, flat surface when in operation.
DO NOT use fan in windows. Rain and moisture may create electrical hazard.
CAUTION:
Do not alter the fan's assembly.
WARNING:
Be sure FRONT and REAR GUARD screw are completely screwed down in locking position before operation.
OPERATING INSTRUCTIONS
This fan comes fully assembled. No further assembly is needed.
TO ADJUST AIRFLOW UPWARD OR DOWNWARD:
used alone or in conjunction with air conditioning. Rotating the fan head upward serves to pull air from the floor and circulate it
throughout the entire room. This fan comes fully assembled. No further assembly is needed.
How To Adjust Tilt
1.
Insert knob to tilt nut.
2.
Use knob to loosen tilt nut by turning counter-clockwise.
3.
Adjust fan head to tilt you want.
4.
Tighten the tilt nut by turning clockwise.
5.
Keep knob for future use.
SPEED CONTROL:
Rotate SWITCH to LOW (1), MEDIUM (2) AND HIGH (3)
speeds for respective air velocity. It is normal for the motor to feel warm to the touch after continuous operation. This fan
features a thermal cutoff that will automatically shut off should it overheat for any reason. If this happens, immediately unplug
the fan from the outlet.
All manuals and user guides at all-guides.com
Tilt fan head to the desired angle. This high velocity fan can be
2
Knob
Tilt Nut
Publicité
