Lorex Baby LB2221AC1B Guide De Démarrage Rapide

All manuals and user guides at all-guides.com
ADD-ON CAMERA
LB2221AC1B
QUICK START GUIDE
What's Included
Getting Started
1
Make sure all power cables are at least 3ft / 1m
away from the crib and out of reach of your child.
Pairing the Camera with Your Monitor
1
2
3
4
5
1-20022013
x2
x1 x2 x1
Connect the power adapter to the camera and
Press the power button
2
then to a power outlet.
to turn on the camera.
Place the camera and both monitors within 1ft of each other.
Make sure the camera and the monitors are turned on.
Press to open
the main menu
Tap
Tap / to select the channel you wish to pair the camera to.
NOTE: If a camera is already connected to this channel,
the new camera will replace the existing camera.
Tap
NOTE: The number shown in the icon will vary depending
on the pairing channel.
www.lorexbaby.com
x2
NOTE: This camera is wall mountable.
Please see the User's Guide provided
with LB221PK29 for details.
Use the included cable clips to help keep
TIP
power cables away from your child.
Feed the power cable through the two plastic
brackets on each cable clip. Position the clip
against a wall or floor.
Remove the adhesive guard
when you are prepared to
install the clip.
Wrap excess cable around
the brackets.
6
Press and hold the
power button on
the camera you are
pairing for 3 seconds.
Live video from the camera is displayed on the
monitor.
NOTE:
Immediately move the camera away from the
monitor to avoid speaker feedback.
OPTIONAL. Repeat steps 2-6 to pair the camera to
7
a second monitor.
NOTE:
If pairing was unsuccessful, repeat steps 2 to 6
of the pairing process.
LB2221AC1B_QSG_TRILINGUAL_R1
Page 1