Vetta VSI-1201BL Mode D'emploi page 5

Notice: With conventional steam ironing, water may leak from the sole plate if a temperature
has been selected too low. If this happens, turn the Temperature Control Dial (1) to the ad-
vised position. Steam will recommence as soon as the appropriate temperature has been
reached.
BURST OF STEAM
This function provides an extra amount of steam to remove stubborn wrinkles.
• Fill the iron with water as described on page 3.
• Turn the Temperature Control Knob (1) to the position "MAX"
• The pilot light turns off when the required temperature is reached
5