Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
S-25552
WATER MIST FIRE
EXTINGUISHER
TOOLS NEEDED
S-25554 Adapter
Funnel
(Sold Separately)
(Not Included)
1.
Remove hose from extinguisher. (See Figure 1)
Figure 1
2. Unscrew handle. Remove entire handle and wand
assembly. (See Figure 2)
Figure 2
Wand
PAGE 1 OF 3
1-800-295-5510
uline.com
S-25556 Deionized Water
(Sold Separately)
SETUP
Handle
3. Using a funnel (not included), carefully pour
deionized water (Uline model # S-25556) into cylinder.
4. Replace handle and wand assembly and tighten
to secure.
5. Attach adapter (Uline model # S-25554) to handle
assembly. (See Figure 3)
Figure 3
Adapter
6. Pressurize with nitrogen to 100 psi (690 kPa).
7.
Check gauge.
Confirm extinguisher
is within acceptable
pressure range.
(See Figure 4)
8. Reattach hose.
Para Español, vea página 2.
Pour le français, consulter la page 3.
Figure 4
0823 IS-25552
Publicité
Sommaire des Matières pour Uline S-25552
- Page 1 (Uline model # S-25556) into cylinder. Figure 1 4. Replace handle and wand assembly and tighten to secure. 5. Attach adapter (Uline model # S-25554) to handle assembly. (See Figure 3) Figure 3 Adapter 2. Unscrew handle. Remove entire handle and wand assembly.
- Page 2 Diagrama 1 4. Vuelva a colocar el ensamble entero del asa y el tubo y apriételo para asegurarlo. 5. Fije el adaptador (modelo Uline # S-25554) al ensamble del asa. (Vea Diagrama 3) Diagrama 3 Adaptador 2. Desenrosque el asa. Retire el ensamble entero del asa y el tubo.
- Page 3 à l'aide d'un entonnoir (non compris). Figure 1 4. Remettez l'ensemble de la poignée et du tube en place et revissez bien le tout. 5. Fixez l'adaptateur (modèle Uline n° S-25554) à la poignée. (Voir Figure 3) Figure 3 Adaptateur 2.