Kenroy Home 93316 Guide D'utilisation Et D'entretien page 6

Installation instructions
2
Connecting the wires
□ Install the fixture bare copper ground wire (1)
under the ground screw (EE) on the crossbar
(BB).
□ Connect the fixture bare copper ground wire (1)
to the green (or bare, or green & yellow ) supply
ground wire (2) in the outlet box using a wire nut
(AA).
□ Connect the ribbed fixture wire (3) to the white
(or ribbed) supply wire (4) in the outlet box
using a wire nut (AA).
□ Connect the smooth fixture wire (5) to the black
(or red, or blue) supply wire (6) in the outlet box
using a wire nut (AA).
4
EE
3
2
AA
House wire
black
(or red, or blue)
(HOT)
House wire
white
(NEUTRAL)
Ribbed line
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
3
□ Push all excess wires into the outlet box.
□ Raise the canopy (GG) to the ceiling and secure
4
6
5
□ Remove the socket ring (C) from socket by
BB
□ Place the glass shade (B) over the socket and
1
Fixture wire
smooth
(HOT)
Fixture wire
ribbed
(NEUTRAL)
Fixture wire
bare wire
(GROUND)
Hanging the light fixture
in place by screwing the screw collar nut (II) onto
the screw collar loop (HH).
Assembling the glass shade
unscrewing the socket ring (C).
secure with the socket ring (C).
HH
GG
II
Socket
A
B
C
6