Publicité
Les langues disponibles
Les langues disponibles
BASIC OPERATION
lnsert one end of the DP cable into your PC's graphics card. An HDMI
cable may also be used. A HDMI cables is not included.
1.
Connect the other end of the cable to the corresponding connector
on your monitor.
2.
Connect the power cable to your monitor then connect the other end to
your power source. lt is recommended that you use a surge protector with
adequate voltage if a wall cannot be reached directly.
3.
Locate the power button on the monitor and press it to turn the monitor on.
FreeSync
The feature itself is off by default when setting 75Hz refresh rate. In order to
use this feature, please note you must have hardware with FreeSync capa-
bility, an HDMI cable or DP cable, and the latest graphic drivers. To use this
feature, connect your computer and monitor with an HDMI cable or DP cable.
A er connecting, you may receive a prompt to enable the feature on your
computer. If you do not receive the prompt, you may need to enable the
function in your graphics card menu. See your graphics card manufacturer's
documentation for instructions on how to turn on and/or enable FreeSync.
INDICATOR LIGHT
Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source, no horizontal or vertical signal
has been detected. Please ensure your computer is on and all video cables
are fully inserted and/or connected.
All manuals and user guides at all-guides.com
HDMI 1.4 HDMI 2.0
HDMI Connector
DP Connector
A
lndicator Light
11
Publicité
