Publicité
Les langues disponibles
Les langues disponibles
HDBaseT Extender – 70M
2.2 41910-HT0 Receiver
1)
ON: Blinks green when the device is operational; turns off when the device stops
working.
2)
LINK: Twisted Pair link status indicator, illuminates green when the connection
between the two devices is successful.
3)
OUT: HDCP compliance indicator, illuminates green when the connected device
supports HDCP and works normally; blinks green when the connected device does
not support HDCP.
4)
POWER LED: Illuminates red when the power is on.
5)
HDBT IN: Connect to the HDBT OUT port of an HDBaseT certified transmitter with
a twisted pair cable.
6)
HDMI OUT: Connect to an HDMI display device.
Threaded insert for locking connector is M3 – 0.5mm (kit sold separately
a)
41900-LKT)
7)
IR IN: Connect with an IR target (sold separately 41910-HIR).
8)
IR OUT: Connect with an IR emitter (sold separately 41910-HIR).
9)
RS232: Serial pass-through
10) DC 24V: Connect with the included power supply (can be placed at transmit or
receive end).
Leviton Manufacturing Co.
All manuals and user guides at all-guides.com
1
5
6
7
PoH
6
2
3
4
8
9
10
www.leviton.com
PK-A3064-10-02-5A
Publicité
