Publicité
Les langues disponibles
Les langues disponibles
4. Installation requirements
•
Must meet the product voltage requirements before use;
The power outlet must be equipped with a ground cable ;
•
•
This product noise, as far as possible away from the environment requires a quiet area;
•
The product is heavy and requires it to be placed on a solid table to run the operation;
•
Placement height requirements of 700mm, to prevent children from touching.
5. Matters needing attention
Water injection and blockage are strictly prohibited,
•
Touch the vent area;
•
Power off required for cleaning or maintenance,
It is strictly prohibited to remove the exhaust pipe;
•
Vents, when the limit temperature is reached or clogged,
Stop heating, resume in 1 minute;
•
When there is no ground in the power outlet,
It is strictly prohibited to use electricity;
•
Can only be operated by a single cup;
•
When no one is operating after power, please turn off the power supply ;
If there is an anomaly, it is strictly prohibited to disassemble the machine,
•
Personnel should be notified of maintenance.
6. Method of operation
•
Plug the power cord into the appropriate outlet and press the on / 0ff button indicator,
The indicator is always red;
Press the 0 sign to enter the standby state, the brush head stops rotating,
•
Exhaust port to stop blowing hot air;
•
Press the I symbol to enter the working state, brush head rotation,
Exhaust port normal hot air blowing;
•
Brush head is divided into 5, the cup is placed vertically, insert the working brush head,
For polishing and drying moisture;
The cup is polished and dried for 6 seconds at a time for best results.
•
www.combisteel.com
4
Publicité
