Geba Tronic Cody Universal 1/1 Mode D'emploi page 36

All manuals and user guides at all-guides.com
General reset
General reset
Put DIP switch
Push reset button
Put DIP switch 4 to back to OFF
on the PCB
ON
> 5 sec.
All factory settings are restored by the general reset!
Factory settings (default settings):
 all memory slots erased (except 00)
 mastercode = sequence 1-8
 pass code 00 = sequence 1-4
 relay 1 active
 control mode = Tiptomatic
 Tiptomatic time = 60 sec.
 switching time = 1 sec.
 lock-out time = 20 sec.