Envirolite EVTF1045R3-35 Mode D'emploi

EVTF1045R3-35
FOUR LIGHT LED FIXED TRACK
Questions, problems, missing parts? Before returning to the store,
call Envirolite Customer Service
8 a.m. – 6 p.m., EST, Monday – Friday
1-855-573-6156
WARRANTY
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of five (5) years from date of purchase. This warranty applies
only to the original consumer purchaser and only to products used in normal use and
service. If this product is found to be defective, the manufacturer's only obligation, and
your exclusive remedy, is the repair or replacement of the product at the manufacturer's
discretion, provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly
installed, set-up, or used in any way not in accordance with the instructions supplied with
the product. This warranty shall not apply to a failure of the product as a result of an
accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure
not relating to faulty material or workmanship. This warranty shall not apply to the finish
on any portion of the product, such as surface and/or weathering, as this is considered
normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty, whether
expressed or implied, of fitness for a particular purpose, other than the warranty
contained herein. The manufacturer specifically disclaims any liability and shall not be
liable for any consequential or incidental loss or damage, including but not limited to any
labor/expense costs involved in the replacement or repair of said product.
SAFETY INFORMATION
WARNING: Disconnect the power prior to removing or installing a light fixture.

Before installing this fixture or removing a previous fixture, disconnect the power by
turning off the circuit breaker or by removing the fuse at the fuse box.

Consult a qualified electrician if you have any electrical questions or need to replace
the driver.

If you have any non-electrical questions about this fixture, please contact our
Customer Service Team at 1-855-573-6156.
PLANNING THE INSTALLATION
WARNING: This fixture has a built-in dimmer. Do not connect an external dimmer on
this light fixture. Doing so will prevent the fixture from functioning properly.
NOTE: Keep your receipt and these instructions for proof of purchase.
Read all instructions before assembling and installation your fixture. Before installing the
fixture or removing a previous fixture, disconnect the power by turning off the circuit
breaker or by removing the fuse at the fuse box. To avoid damaging this product,
assemble it on a soft, non-abrasive surface such as carpet or cardboard.
TOOLS REQUIRED
All manuals and user guides at all-guides.com
PACKAGE CONTENTS
NOTE: Contents are not shown to size.
INSTALLATION INSTRUCTIONS
STEP 1
 Mount the mounting bracket (II) to the
STEP 2
NOTE: If you have electrical questions
 Connect the black supply wire to the
 Connect the white supply wire to the
 Connect the fixture ground wire and the
 Wrap all wire connections with electrical
 Carefully tuck all wires and wire nuts
Flat Head
Phillips
Screwdriver Screwdriver
Ladder
Drill
BB CC
GG
Part Description Quantity
AA Fixture 1
BB Wire Nut 3
CC Canopy Screw 2
DD Mounting Screw 2
EE Ceiling Anchor 2
outlet box using the mounting screws
(DD).
consult your local electrical code
for approved grounding methods.
black fixture wire using a wire nut (BB).
white fixture wire using a wire nut (BB).
supply ground wire together using a wire
nut (BB).
tape for a more secure connection.
(BB) into the outlet box.
Wire Wire
Pencil
Cutter Stripper
Electrical
Tape
AA
DD EE
HH II
Part Description Quantity
FF Anchor Screw
GG Remote Mount
HH Remote Control
II Mounting Bracket
II
DD
BB
Drill
Bit
Safety
Goggles
FF
2
1
1
1
II
AA