Publicité
Liens rapides
Fitting Instructions - Read instructions carefully before fitting and follow them for correct use
IN8099
ULTI Bars - X2
FX4011
X8
FX4014
X8
(M8)
(RUBBER)
MA6021
X8
MA6065
X4
!
TOOLS REQUIRED
10MM X 1
13MM X 2
This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for
manufacturing purposes, copied nor communicated in any way to third parties without written
permission from VAN GUARD ACCESSORIES LTD.
IN8099_F
(CN:00114)
FX4016
X8
FX4013
X8
(M6)
(M6)
ME0064
X2
ME0065
X1
FX4020
X8
FX4024
(M8)
(M8X40)
ME0066
X1
ME0203
X4
GB. Tested to 80kg per bar. Maximum load is in accordance with the vehicle manufacturer's load bearing
capacity (refer to the vehicle handbook). Do not exceed this limit.
FR. Testé à 80 kg par barre. La charge maximale doit être conforme à la capacité de charge du constructeur de
véhicule (veuillez- vous référer au livret du véhicule). Ne dépassez pas cette limite.
DE. Geprüft bis 80kg pro bar. Die Maximallast steht im Einklang mit der angegebenen Ladekapazität des Fahrzeu-
gherstellers (diese finden Sie im Fahrzeughandbuch). Die Maximallast darf nicht überschritten werden.
DK. Testet til 80 kg pr. bar. Maksimal lasteevne afhænger af varevognproducents angivelser i varevognens
håndbog. Overskrid ikke denne grænse.
MAX
80KG
X8
FX4025
X8
(M6)
ME0759
X4
AS3192
??
MAX
Fair Oak Close, Exeter Airport Business Park,
FX4026
X8
FX4042
X8
(M6X20)
(M6)
X2
i
Van Guard Accessories Ltd
Exeter, Devon, EX5 2UL
www.van-guard.co.uk
IN8099 - PAGE 1 OF 8
Publicité
Manuels Connexes pour Van Guard ULTI Bars - X2
Sommaire des Matières pour Van Guard ULTI Bars - X2
- Page 1 80KG Van Guard Accessories Ltd This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for Fair Oak Close, Exeter Airport Business Park, manufacturing purposes, copied nor communicated in any way to third parties without written Exeter, Devon, EX5 2UL permission from VAN GUARD ACCESSORIES LTD.
- Page 2 GB: THIS PRODUCT SUITS THE FOLLOWING VEHICLES FR: CE PRODUIT CONVIENT AUX VÉHICULES SUIVANTS DE: DIESES PRODUKT IST FÜR DIE FOLGENDEN FAHRZEUGTYPEN GEEIGNET DK: DETTE PRODUKT PASSER FØLGENDE KØRETØJER VG286-2 Vehicle: Nissan NV400: 2010-2021 Nissan Interstar: 2022 on Renault Master: 2010 on Vauxhall Movano: 2010-2021 Wheel Base: SWB (L1) Roof Height: Low (H1)
- Page 3 GB: THIS PRODUCT SUITS THE FOLLOWING VEHICLES FR: CE PRODUIT CONVIENT AUX VÉHICULES SUIVANTS DE: DIESES PRODUKT IST FÜR DIE FOLGENDEN FAHRZEUGTYPEN GEEIGNET DK: DETTE PRODUKT PASSER FØLGENDE KØRETØJER VG286-2 Vehicle: Nissan NV400: 2010-2021 Nissan Interstar: 2022 on Renault Master: 2010 on Vauxhall Movano: 2010-2021 Wheel Base: LWB (L3) Roof Height: Medium (H2)
- Page 4 ME0064 ME0065 ME0759 & ME0759 & ME0066 ME0064 ME0066 ME0759 ME0759 & ME0759 & ME0065 ME0064 Remove roof plugs to reveal the vehicles fixing points. Stick rubber pads to all roof brackets. IN8099 - PAGE 4 OF 8...
- Page 5 Loosely secure the middle inner fixing brackets to the inside of the vehicle by inserting the M6 1/4 turn nut inserts (FX4025) into the positions shown in FIG.1. Then place the middle inner bracket into place and loosely bolt into the M6 1/4 turn inserts using M6x20 hex bolts and M6 washers. Please note the cable trim (shown in FIG.2) may have to be removed.
- Page 6 Place the roof brackets onto the roof and bolt down through the fixing points and Place the roof bars onto the roof brackets and loosely secure using M6X16 coach through the inner fixing brackets using M8X40 hex bolts, M8 washers & rubber bolts &...
- Page 7 Secure the roof brackets to the inner fixing brackets using M8 flange nuts and Tighten the M6 fixings on all inner fixing brackets to 8Nm. tighten to 12Nm. 12Nm IN8099 - PAGE 7 OF 8...
- Page 8 2. Take care when loading and unloading goods on to and off the vehicles roof. 3. Van Guard Accessories LTD and/ or its distributors do not accept liability for: Any products that have been fitted incorrectly.