PROZIS PULSE hex Mode D'emploi page 8

8
manual-pulse-hex.indd 8
All manuals and user guides at all-guides.com
EN
INSTRUCTIONS
Functional area description
Control area
Please charge the device using the
enclosed USB Cable before use by
connecting it to a computer or adapter.
Please note: This should be done before applying the patch device
onto the skin. Avoid wrinkling the stickers. Remove any air bubbles
below the sticker surface by pressing them toward the edges.
Conductive Region
1.
Remove the blue plastic film from the enclosed
electrode Gel Pad.
2.
Place the electrode Gel Pad on the back of the
control unit.
3.
Remove the transparent plastic film and the
device is ready to be used.
2019-04-19 09:37