Belkin USB CAT5 Mode D'emploi page 11

Installation
Step 1 Connecting the Transmitter to the Computer or
KVM Switch
1.1 Disconnect all computers from the electrical power supply.
1.2 Using the Transmitter unit, connect the built-in VGA and USB
cables to the monitor and USB ports on your computer or to the
console ports on your KVM switch.
(Refer to diagram below.)
Step 2 Connecting the Local Console to the Transmitter
2.1 From your local console, connect your monitor to the VGA console
port on the Transmitter unit. (Refer to diagram below.)
2.2 Connect your keyboard and mouse to the USB console ports on the
Transmitter unit. (Refer to diagram below.)
EN-9
All manuals and user guides at all-guides.com
Transmitter
Transmitter