Emprex EU-S10C Guide De Démarrage Rapide page 4

Connecting the Enclosure Kit to a Computer
1) Insert the Secure Key
the rear panel of the Enclosure Kit. As the shape of the secure
shape of the IEEE 1394 port, ensure that the
port. Incorrect insertion into a port other than the designated secure
damage to the
2) Connect the AC/DC power adapter; ensure that the green LED indicator is active. The
orange LED indicator
3) Insert one end of the USB or IEEE 1394(b) connector into a corresponding port on the
enclosure.
4) Insert the USB or IEEE 1394(b) connector into an available port on the computer.
OK!!
into the secure
Secure Key or other ports/equipment.
will blink during data transfer.
key port indicated by the secure key "
Secure Key is inserted only into the secure
4
" icon on
key port is very similar to the
key port may result in
key