Omnitronic GEQ-231 Mode D'emploi page 13

GEQ-231 Equalizer
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen an OMNITRONIC GEQ-231. If you follow the instructions given in this manual,
we are sure that you will enjoy this device for a long period of time. Unpack your GEQ-231.
Features
2 x 31-band equalizer
• 2-channel version, 2 x 31 frequency controls with 1/3 octave steps
• Long sliding frequency controls with center click
• EQ gain switchable ±6 dB to ±15 dB
• Hi Cut (4-30 kHz) and Low Cut (10-300 Hz), switchable
• Separate level control per channel
• Bypass switch allows instant comparison of the original sound with the equalized sound
• 7-fold LED level meter with clip indicator
• Inputs and outputs via 6.3 mm jack sockets (1/4"), XLR sockets and screw terminals
• Groundlift switch
• Rack installation, 2 U
USER MANUAL
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
13/26 00026057.DOC, Version 1.0