Home Decorators Collection HDC48HRV Instructions D'assemblage page 6

Assembly
1
Adjustable Level
□ In case of uneven floors, floor levelers are provided at the bottom of
the vanity. If necessary, adjust floor levelers by hand to correct
tilting and/or level doors.
2
Backsplash Installation
□ To mount the backsplash (C) to the wall, apply a thin bead of
silicone compound (not included) to the unpolished back side and
bottom of the backsplash (C). Position backsplash (C) as shown
onto vanity top (A) and against the wall. Clean any excess silicone
compound before allowing to dry.
C
6
Silicone
A