Publicité
Les langues disponibles
Les langues disponibles
Thank you for buying a HIGHSIDER product. Because of our passion for motorcycles all our products are designed to meet your needs as a motorcyclist. We wish you always a safe and pleasant ride with your new HIGHSIDER product
from Paaschburg & Wunderlich GmbH.
Important safety information. If you are not a trained mechanic, contact a specialist workshop to install the product. Failure to comply with the installation instructions can cause damage to your vehicle and invalidate your warranty
claims. No liability is accepted for consequential damage. The manufacturer assumes no liability for damage due to improper installation of products. Improper use of this product can impair driving safety. Unauthorized reworking
and / or changing of the product can lead to failure of the function and is not permitted. Structural changes to the parts are prohibited and lead to the loss of liability and guarantee claims. It is not necessary to make an entry in the
vehicle papers or to carry documents with you. Please keep these instructions for future reference.
Scope of delivery:
• 1 pc. of bar end mirror
Installation of the mirror:
1. Make sure that your vehicle is positioned safely
2. Now screw the mirror into the mirror mounts (A. Left or B. Right) on the handlebar (Fig. 3).
ATTENTION:
The mirror must be easy to screw into the mirror mounts on the handlebar. Otherwise there is a risk of damaging the thread. You can find more adapters in our Webshop.
3. Adjust the mirror so that a good rear view is achieved.
4. Now lock the nut (A. Left or B. Right) on the mirror adapter against the mirror mount on the handlebar (Fig. 4). To avoid damaging the thread, only tighten the nuts hand tight.
5. Make sure that the mirror or mirror arm does not interfere with the operation of other attachments or switches.
6.
ATTENTION:
Before each ride, check whether parts or screws have loosened due to the vibrations and that the mirror setting is still correct.
Fig. 1
Before each ride: It is the duty and responsibility of the rider to regularly check and maintain the safety-related vehicle parts. Before starting your journey, check the correct adjustment and function of the products and the tightness of all screwed connections.
Warranty: Take the time to do a 100% professional job of installing the products. Take into account all our installation and safety instructions.
A faulty, improper installation or handling of the product will void the warranty.
Maintenance/Care: Do not use aggressive detergents to care for the products. The products can be perfectly cleaned with a simple, lukewarm detergent solution. Contact with brake fluid, brake cleaner, fuel, etc. should be avoided. Immediately pick up any unintentionally
applied impurities with a soft cloth and clean the surface with detergent solution
Enviromental Information: This product may not be disposed in the normal household rubbish at the end of its lifetime. The disposal can be done through the Paaschburg u. Wunderlich customer service or a local return and waste collection institution.
HIGHSIDER Tips & Tricks on
https://www.youtube.com/c/HIGHSIDERTippsTricks
Exclusion of liability and warranty regulation:
In the event of improper handling, installation or use of the device, warranty and guarantee claims may expire. Due to the non-verifiability of the correct application, Paaschburg und Wunderlich GmbH assumes no liability for direct or indirect damage or consequential damage resulting from the operation of the device.
This does not apply if the damage is based on intent or gross negligence on the part of Paaschburg & Wunderlich GmbH, or if the damage consists in injury to life, limb or health, or Paaschburg & Wunderlich GmbH has culpably violated an essential contractual obligation (cardinal obligation).
Paaschburg & Wunderlich GmbH, Am Alten Lokschuppen 10a, D-21509 Glinde (GER),
Tel.: +49 (0) 40 248 277-0; E-Mail:
sales@pwonline.de
301-363A_Rev00_2023-01
Please read this manual carefully prior to installation
For assembly, first select the appropriate thread adapter. Screw the correct adapter for your vehicle into the mirror arm (Fig. 1 and Fig. 2).
.
Find useful additional accessories like stem extensions, resistors, electronic relays, adapter cables and other equipment in our Webshop!
Fig. 2
:
and safety instructions
Mounting
HIGHSIDER VICTORY, MONTANA mirror
Fig. 3
Fig. 4
A.
B.
You can find more
www.highsider-germany.de
A.
B.
products at:
www.highsider-germany.de
All rights reserved. Changes and errors are excepted.
VIC / MON
A: 117/102 mm
B: 83/102mm
C: 210/ 200mm
D: 135 / 135 mm
Seite 3 von 5
Publicité
