PURE Jongo A2 Mode D'emploi page 21

Changing Jongo's name
If you prefer, you can change the name that the Pure Connect app, Pure
Stream and Bluetooth uses to identify Jongo.
1. Type the name (e.g. 'Jongo Bedroom 1') that you want to assign Jongo
in the Your Jongo's Name box and click Change name. After Jongo's
name has changed, the Change name button will grey out.
2. Push the WiFi button on the rear of Jongo to put Jongo back into Wi-Fi
Connected mode (see page 7 for more information).
Wireless network settings
See page 8 for more information on wireless setup.
Clearing all network settings
To clear all network settings, click the Clear all network settings button.
Note: You will need to reconnect to Jongo in Wi-Fi Setup mode to re-configure
the network settings.
1-Euro.indb 19
All manuals and user guides at all-guides.com
EN
19
4/9/2013 2:25