Power Dynamics Passive Serie Manuel D'instructions page 3

UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
CONNECTIONS
1. FILTER SWITCH: The inclusion of a selector switch provides a
selectable wiring for the built-in subwoofer and a thru output for
full range enclosures. The passive bi-amp mode offers multiple
primary advantages: lower distortion, greater flexibility of signal
transmission and an improved overall performance of your
system.
WARNING: Never switch modes if the subwoofer and/or
speakers are wired to an active signal source!
2. INPUT: Receive the signal coming from an external amplifier.
(Passive: +1/-1 connected; +2 -2 not connected, only thru)
(Passive BI-AMP: +2/-2 connected; +1/-1 LF not connected, only
thru).
3. OUTPUT: Link for connecting speakers.
(Passive +1-1 connected; +2 -2 connected)
(Passive BI-AMP +1-1 connected; +2 -2 connected)
3