Publicité
Les langues disponibles
Les langues disponibles
1.
2.
PLAYBACK
1.
2.
Open the CD door and place a CD/MP3 disc with the label up in the CD compartment.
3.
Close the CD door.
4.
Focus search is performed if disc id inside.
For CD disc-
For MP3 disc-
5.
The CD/MP3 disc will playback automatically.
6.
7.
8.
PROGRAM
You can program disc play in any order.
Be sure to press the STOP button before use.
1.
Press the P button, the display will show P01 and PROG will light on.
2.
Select desired track by using the SKIP < or SKIP > button.
3.
Press the P button again to confirm desired track into the program memory.
4.
Repeat step 2 and 3 to enter additional tracks into the program memory.
5.
When all the desired tracks have been programmed, press the PLAY
programmed.
6.
Press the STOP button twice to terminate programmed playback.
7.
Programing 21 tracks for CD and 99 tracks for MP3.
IMPORTANT
Note: Although this CD player can read CD-R, CD-RW and MP3 discs - in addition to normal CD's - the playability of CD-R, CD-
RW and MP3 discs may be affected by the type of software that was used to create the discs, as well as the quality and
condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with
the player.
While CD is playing, press this key
Press once: to repeat current playing song.
Press twice: to repeat all songs in playing disc.
Press 3 times: to exit repeat mode.
While MP3 is playing, press this key
Press once: to repeat current playing song.
Press twice: to repeat the album.
Press 3 times: to repeat all the songs in playing disc.
Press 4 time: to exit repeat mode.
.
CD/MP3 OPERATION
button to play the disc in the order you have
GB 5
E N
P.5
Publicité
