Publicité
Les langues disponibles
Les langues disponibles
PS60WTS, PS130WTS, AND PSBF66WTS MULTI FUNCTION CONTROLS
Display
Screen
Desired
Temperature
Room
Temperature
Mounted Button Functionality: Normal Operation
Power
• Press to begin stove heating if the stove was off.
• Press to begin stove shut off if the stove was on.
Temperature Status
• Press to see temperature readings of the stove.
• Displays the exhaust pipe temp, the hopper
protection temp and number of run hours etc.
Settings
• Press to enter User Settings Menu (Figure 17b).
• On this menu, you may select ˚F or ˚C, ECO Mode
(see Wi-Fi controls for explanation), Stir Time/Exhaust
Fan/Blower settings, etc.
Scheduling
• Press to enter desired run times.
CAUTION: The manufacturer has programmed preset rates to ensure proper operation. It is not advised to
reprogram rate settings.
Grand Teton Wood Pellet Fire Stove
Rate Select
Figure 18a
Mounted Multi Function Display Panel
Figure 18b
Wireless Connection
User Menu
Lock Screen
• Lock screen will illuminate when screen is locked in a
Programmed Mode.
Auger
• Allows user to use/engage the auger directly, prep/
pre-feed the firepot, or get pellets into the auger/unit
prior to lighting.
Rate Select
• Pressing the rate select arrows will toggle between
four configurable heating presets (see Wi-Fi controls
for explanation of P#'s). The currently set preset is
displayed between the Up and Down arrows.
Desired Temperature
• Using your finger, press down and rotate around the
wheel to desired temperature (only applicable when
using Thermostat and ECO modes).
17
Operating Instructions and Owner's Manual
Auger
Lock Screen
Scheduling
Settings
Temperature
Status
Power
Publicité
