HOMCOM B00-018 Mode D'emploi page 2

EN
Turntable touch combination lock instruction manual
Full voice prompt, you can press the voice prompt operation, any key touch wake.
The number of digits of the password is 6-12 digits. (Factory mode: Common mode, user
password 1234, administrator password 123456).
Normal Mode (Password/Fingerprint) Security Mode (Password + Fingerprint)
1. Door opening operation:
In normal mode, enter the correct password or correct fingerprint (in the case of empty
fingerprints, any fingerprint can be), the electromagnet is closed for 6 seconds and the
unpacking light is on for 30 seconds, and the voice prompt "verification passed", and the
safe opens the door.
In safe mode, enter the correct password and correct fingerprint (in the case of empty
fingerprints, any fingerprint can be), the electromagnet is closed for 6 seconds and the
unpacking light is on for 30 seconds, and the voice prompt "verification passed", and the
safe opens the door.
2. Programming operation:
Press the settings button, the voice prompt "Please enter the administrator password and
confirm with the "#" key. Enter the administrator password "123456", press "#" key to
enter the setting mode and voice prompt:
1: To set user password, please press "1";
2: To add fingerprints, press "2";
3: To delete the fingerprint, please press "3";
4: To set the administrator password, please press "4";
5: To set the door opening mode, please press "5";
6: To exit, please press the "*" key.
2.1 Set user password: (Default: 1234)
Press "1" and the voice prompt "Please enter user password and confirm with "#" key".
Enter 4–8-digit password (preset user code) and press "#" key to confirm, the voice
prompt "Please enter again". Then enter the preset user code again, the voice prompt
"Setup successful" and return to the main setting mode. If the password input does not
meet the requirements, the voice prompt "Input error, please re-enter".
2.2 Add fingerprint: (default: empty fingerprint)
Press "2", the voice prompt "Please press your finger", at the same time the fingerprint
light is on (blue) and put in the finger, the registration is successful, the voice prompt
"registration successful" and the fingerprint light is "green", (If it is unsuccessful, the
buzzer beeps twice and returned to the main programming, the fingerprint light is red).
2.3 Delete fingerprints:
Press "3" to clear the fingerprint and the voice prompt to delete it successfully.
2.4 Set administrator password: (default: 123456)
Press "4" and the voice prompt "Please enter the administrator password and confirm with
the "#" key. Enter 4–8-digit password and confirm with "#" key, the voice prompt "Please
enter again", then enter the preset password again and voice prompt "Setup successful"
and return to the main setting mode. If the password input does not meet the
requirements, the voice prompt "Input error, please re-enter".
2