enphase IQ EV Serie Manuel D'utilisation page 10

IQ EV Charger User Manual
OPERATION
The IQ EV Charger is a compact wall or pedestal-mounted EVSE
that provides the Plug-in Hybrid or Battery Electric Vehicle
(together Plug-In Electric Vehicles, or "PEV") user with a safe
and manageable link between the power grid and the PEV. Both
hardwired and plug-in IQ EV Charger versions are available.
To use the IQ EV Charger, simply unwrap the charging cable and
plug the SAE J1772 connector firmly into the vehicle's charge port.
Normally, the vehicle will immediately request a charge using a
special communication line in the cable. Within a few seconds, the
Green Charging light on the face of the IQ EV Charger will turn
on, and the charging cycle will begin. After an average driving
day, the vehicle battery pack will require several hours to recharge
completely. Charging overnight is the most convenient way to
maintain healthy batteries and ensure the vehicle's full range will
be available for the next day.
When the vehicle has stopped charging, the Green Charging
light on the IQ EV Charger will turn off. To remove the connector
head once a charge cycle has completed (or to interrupt a charge
in progress), press and hold down the latch release lever on the
connector handle, then unplug the connector from the vehicle
charge port.
10