Locating The Ir Receiver - Marmitek IR 100 USB Guide Utilisateur

4.2 LOCATING THE IR RECEIVER

2
Place the very small IR receiver (2) that comes with the IR 100 USB™ so that it
can be seen by your (infrared) remote control and receive the commands (max.
8 metres).
•
The most logical location for the IR receiver is, for example, on the cabinet
in which the A/V equipment is located or near the TV.
•
Use the self-adhesive strip which is supplied to locate the IR receiver just
about anywhere you please.
•
Experiment with the location before you stick the IR receiver in its final
position.
Note! The sticky strip may lead to discolouration or leave glue residues on
certain surfaces.
4.3 LOCATING THE IR BLASTER LED
Stick the IR blaster LEDs (3) wherever you like in the cabinet or TV unit. You
will then be able to operate all of the A/V devices in that specific section.
•
With a correct placement one blaster LED can control all A/V devices
placed in the same compartment.
•
Or you place the blaster LED on one of the A/V devices in the middle of
the cabinet and the other equipment will be controlled as well by the
reflection of the infraredsignal.
IR 100 USB™
3
1
2
5