Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY AND INSTALLATION INSTRUCTIONS:
No tools required for assembly and installation.
FOR FIRST TIME USE : Remove pull tab
between the top cover (1) and housing (4).
(Fig.1)
1. Firmly slide post (5) into solar housing (4).
(Fig.2)
2. Attach the post ( 5 ) to stake ( 6 ). Push the
assembly firmly into the ground- DO NOT
use a hammer. For ground with hard soil, to
prevent breaking the stake (6), use trowel to
loosen soil first. (Fig.3)
CHARGING THE BATTERY:
For optimum performance, it is best to install the solar lights in full sunlight and charge
for 10-12 hours. Allow the light to run at least 8-12 entire charging and discharging
cycles to reach battery's maximum capacity.
1
4
Fig.1
4
5
Fig.2
5
6
Fig.3
Page 4
Publicité
