Nuvo SLF06 Instructions D'installation page 4

WARNING
To avoid injuries, burns or electric shocks:
• Keep children away from the battery and the accessories
• Insert the battery according to the polarity marked on the battery
• Do not mix old batteries with new ones
• Do not use batteries different from those of this product
• Do not set the batteries on fire
• Do not use damaged batteries
• Do not use frozen batteries
• Do not immerse the product in liquid
• Do not expose the product to excessive heat or an open flame
• Recycle or discard the battery according to local and national regulations
ASSEMBLY
1. Twist counterclockwise and remove the top cover (A) from the housing (B) and turn the switch on (FIRST TIME
USE ONLY).
2. Pick the mode you would like when the solar light is on. Choose "ON" for continuous light or "FLAME" mode for a
simulation of a flame.
3. Assemble the top (A) to the housing (B)
4. If the post is 4" x 4", secure the light body (B) to the post using the larger screws provided.
5. If the post is 6" x 6", secure the base (C) to the post by using the larger screws provided and then place the light
body (B) on the base (C) and attach with the smaller screws provided.
A
B
·
nuvoiron.com 1.866.955.0355
Decorative Flame Solar Post Cap Lights
·
info@nuvoiron.com
#NuvoIron for a chance to be featured on our social media pages!
INSTALLATION INSTRUCTIONS
B
C
@nuvoironfencing @nuvoiron
SLF06
@nuvoiron @nuvoiron