Télécharger Imprimer la page

XPower P-80 Serie Manuel D'utilisation page 5

Publicité

Les langues disponibles

Les langues disponibles

Switch Plate
Speed Switch
• Turn to "OFF" position
to switch the air mover
OFF. Turn to any speed
position to switch the
air mover ON.
• Turn clockwise to set
the desired fan speed.
• There are 3 fan speeds
from: 1, 2, 3. "1" is the
lowest speed and "3"
is the highest speed.
* The timer switch function does not apply to all models mentioned in this manual.
Additional Electrical Receptacle (Daisy Chain)
• Other appliances can be plugged in the additional electrical receptacles and work
whether the air mover is on or off. However, the total amperage must be lower than the
amperage instructed. Different models may have varying instructions.
• If the air mover or the plugged in appliance stops working, press the RESET BUTTON
to reset the circuit.
0
ON
180
1
OFF
CIRCUIT
12A
BREAKER
TOTAL OUTPUT
12 AMPS MAX WITH THIS UNIT OFF
9.5 AMPS MAX WITH THIS UNIT ON
Timer Switch*
• Turn clockwise to set timer
60
• The timer can be set for
120
2
3
• When the timer reaches
Reset Button
Electrical Receptacle
for minutes count down to
an automatic stop.
up to 180 minutes (3
hours).
"0" position, the unit
stops working. On "ON"
position, it will work
constantly.
English - 5

Publicité

loading

Ce manuel est également adapté pour:

P-130 serieP-230 serieP-80aP-130aP-230at