Publicité
1. Attach all antennas.
2. Connect the power adapter to the socket on the front of the device. Then plug the other end of the power adapter
into a power outlet.
3. Connect to the device wirelessly using SSID and password provided on the device information label or use an
Ethernet cable connected to LAN port.
1. To enter the router's Web interface (WebUI), type
2. Use login information shown in image A when prompted for authentication.
3. After you log in, you will be prompted to change your password for security reasons. The new password must
contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is
mandatory, and you will not be able to interact with the router's WebUI before you change the password.
4. When you change the router's password, the
used to set up some of the router's main operating parameters.
A.
POWER SOCKET PINOUT
HARDWARE INSTALLATION
LOGIN TO DEVICE
http://192.168.1.1
Configuration Wizard
admin
admin01
into the URL field of your Internet browser.
will start. The
Configuration Wizard
is a tool
Publicité
