Publicité
Les langues disponibles
Les langues disponibles
WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
• Do not allow children to play with the gate.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-877-265-2220.
BEFORE YOU BEGIN:
BEFORE YOU BEGIN:
The primary design of the Y-latch
is for the aluminum double drive gates
Please read the instructions completely before assembling.
with 2" uprights.
Retain manual and your dated sales slip for future reference
or warranty claims.
Gate
Upright
2"
Component list:
QTY
Description
1
Y-Latch
12
Stop Bracket
Stop Bracket
1" #2 Square/Phillips Combo
6
Self-Tapphig Pan Head Screws
MIN. SPACING 1.75"
Stop Bracket
MAX. SPACING 3.0"
To obtain and review a copy of the warranty please visit: barretteoutdoorliving.com. You may also contact us at
1-877-265-2220 or email CS.outdoorliving@barretteoutdoorliving.com.
2
Swing Arms
Screws
Swing Arms
Fig. 1
Screws
Fig. 3
TOOLS NEEDED:
TOOLS NEEDED:
Gate
#2 Square/Phillips Screwdriver
Safety Glasses
Tape Measure
Pencil
Drill
Arm Bracket
Gate
#2 Square/Phillips Screwdriver
Safety Glasses
Tape Measure
Pencil
Drill
Fig. 2
Arm Bracket
Fig. 4
Publicité
