Télécharger Imprimer la page

BOMANN EK 6022 CB Mode D'emploi page 24

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Problem
The appliance is not turning
on at the programmed start
time.
The flame effect does not 
work.
You will hear a warning
signal. All segments in the
display start flashing.
Technical Data
Model:..................................................................EK 6022 CB
Power supply:........................................... 220 - 240 V~, 50 Hz
Power consumption: .........................................1000 / 2000 W
Protection class: .....................................................................
Net weight: ..................................................... approx. 16.2 kg
The right to make technical and design modifications in 
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibil-
ity and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
24
EK6022CB_IM
Possible Cause
The appliance has been disconnected
from the mains (possibly due to power
failure).
The appliance has been reset to the basic
settings
A component is defective.
The overheating protection has been
activated.
Solution
Check the settings of the current weekday, the
current time and the timer settings.
Contact our service or a repair centre.
1. Switch off the appliance by using the power
switch.
2. Let the appliance cool down for at least
15 minutes before switching it on again.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
This helps avoid the potential effects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of re-uti-
lisation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
02.08.18

Publicité

loading