Main Functions - Nicols UV PAR 543 Manuel D'utilisation

5.

MAIN FUNCTIONS

DMX 512 Address Setting
Press the MENU button up to when the
Use DOWN and UP button to change the DMX 512 address. Once the address has been selected, press ENTER button to
setup or automatically exit menu mode without any change after 1 minute.. Back to the previous functions without any
change press MENU button.
Master/Slave Mode
Press the MENU button up to when the
Use DOWN and UP button to select the
mode has been selected, press the ENTER button to setup or automatically return to the main functions without any change
after 1 minute. To go back to the functions without any change press the MENU button again.
Show Mode
Press the MENU button up to when the
button to select the
or strobe mode, press ENTER button to confirm, and use DOWN and UP button to select color 1-12 or fade speed 1-8 or
Strob speed 0-255. Once select, press ENTER button to setup or automatically exit menu mode without any change after 1
minute. To go back to the last function without any change press the MENU button.
LED display
Press the MENU button up to when the
Use DOWN and UP button to select
button to setup or exit menu mode without any change after 1 minute. Back to the functions without any change press MENU
is shown on the display. Pressing ENTER button and the display will blink.
is showing on the display. Pressing ENTER button and the display will blink.
(Master) or the
is shown on the display. Pressing ENTER button, Use DOWN and UP
(sound)) or (color) or
is shown on the display. Pressing ENTER button and the display will blink.
(display always on) or
(slave 1) or
(strobe), or (fade), if you select the color ,fade
(display off ) mode. Once select, press ENTER
(slave 2) mode. Once the
12