Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
How to Use
Unpacking your ice maker
1. Remove the exterior and interior packaging and check that the ice basket and ice
scoop are inside. If any parts are missing, please contact our customer service.
2. Remove any tape fixing the ice basket & ice scoop. Clean the tank & ice basket
before use.
3. Put the ice maker on a level and flat counter top away from direct sunlight and
other sources of heat (i.e. stoves, furnaces and radiators). Make sure there is at
least a 10mm gap between the back & sides of the product from the wall.
4. Allow two hours for the refrigerant fluid to settle before plugging in the ice
maker.
5. The appliance must be positioned so that the plug is accessible.
Using your Ice Maker
1. Open the cover, remove the ice basket and pour water into the tank. Ensure that
the water level does not exceed the maximum mark. Press the "power" button
on the control panel to begin the ice making cycle.
2. Select the ice cube size by pressing the "Select" button. If the room temperature
is lower than 15˚C, it is recommended to select small ice cubes in order to avoid
the ice sticking together.
3. The ice making cycle lasts approx. 5 to 13 minutes, depending on the ice cube
size and the room temperature. The recommended room temperature is
between 10˚C- 38 ˚C.
4. The appliance will need to be run for 2-3 cycles before the desired size of ice can
be formed. This is to allow the cooling chambers of the ice make to cool to the
correct temperature
5. If the water pump cant inject water, the ice maker will stop automatically and
the "Add water" indicator will come on. Press the "Power" button and fill the
water up to the max water level mark and press the "Power" button again. Allow
the refrigerant to settle for 3 minutes before restarting.
6. If you are not using the machine for a long period of time, drain all the water
from the reservoir and dry the tank.
7
Publicité
