Publicité
Les langues disponibles
Les langues disponibles
Test Your Smoke Alarm
STEP 2
Press and hold the test button for one second. It will blink
sound three loud beeps to indicate that it is functioning correctly. If it
does not, please contact our customer support team. The National Fire
Protection Association (NFPA) recommends that you perform this test
on all smoke alarms at least once a week. Never use an actual flame to
test your alarm.
Test/Hush Button
8
STEP 3
red
and
The NFPA recommends installing a
smoke alarm in the following areas:
On every floor, including finished
■
attics and basements.
■
Inside and outside every
sleeping area.
■
At the top of the first-to-second
floor stairway and on the
basement ceiling near the entry
of the stairs.
■
In homes with more than
1,000 square feet on one level,
additional alarms may
be required.
Mount Your Smoke Alarm
9
Publicité
