GYS Toparc 400L Mode D'emploi page 6

Translation of the original instructions
Power requirements: Max 5 V DC 1000 mA
Battery type: 3.7V 2000 mAh Lithium
Bulb type: LED
Charging time: around 4-6 hours
PACKAGE CONTENT
Waterproof heavy duty work light
USB charging cable
RUNNING TIME
The approximate running times for this light when the battery is fully charged and in maximum performance state are
as follows:
COB floodlight: around 2 hours on high light and 4 hours on low light.
White LED torch: around 3 hours
MAGNETIC BASE
The light features a magnetic base with a soft coating on the bottom, allowing the light to be magnetically attached to
a vehicle or other metal objects without damaging or scratching the painted surface.
NOTE
Do not place the light on or near computer equipment, computer disks or other types of magnetic storage equipment
as strong magnetic fields can erase or corrupt data.
OPERATION
In order to ensure maximum battery performance, the light should be fully charged before being used for the first time.
1. 4 W COB floodlight setting: Press the down on/off switch (part 6), the COB floodlight will turn on. Press once for low
light, twice for high, and three times to power off.
2. 1 white LED torch setting: Press the up on/off switch (part 5), 1 white LED torch will turn on. To turn off the light,
hit the on/off switch again.
CHARGING INSTRUCTIONS
Charge the waterproof heavy duty work light, first you need unscrew the base counter-clockwise and take out the bat-
tery pack in the light cavity, then charge via the supplied USB cable into a dedicated USB charger (not included).
THE BATTERY SHOULD BE RECHARGED EVERY THREE MONTHS.
This will help keep a longer-lasting battery life. The USB cable is for re-charging the battery only.
6
All manuals and user guides at all-guides.com
WATERPROOF PORTABLE LAMP 400L
1. Plug the included USB cable into the USB charging socket and plug the other
end of the cable into a USB wall charger socket(not included) or a 12 V USB
car charger socket (not included) to charge the battery pack.
2. The charging LED indicator will glow RED while charging is in progress.
3. The battery will be fully charged after 4-6 hours, and the RED charging indi-
cator will turn GREEN when the unit is fully charged.
4. Disconnect the USB cable from the battery pack, remove the adapter from
the wall socket or 12 V USB car charger socket, and switch off.
EN