Powerfix Profi PHG 3000 B2 Mode D'emploi page 11

Handling and operation
GB
IE
Operating switch
Temperature regulator
Heating operation
Setting the temperature
8
In this chapter you receive important information for the handling and operation
of the appliance.
The operating switch 2
heating levels on and off .
The temperature regulator
By turning it clockwise a higher temperature is set, by
turning it anti-clockwise a lower temperature will be set.
♦ Ensure that the operating switch
♦ If the appliance is being taken into service for the fi rst time or if you want
to reset the desired temperature, turn the temperature control
MAX position.
♦ Set the operating switch
♦ Turn the temperature regulator
♦ When the room has reached the desired temperature, slowly turn the
temperature regulator
This means that the heating element is now switched off .
♦ The heating element is now switched on and off automatically by the
thermostat and the temperature is kept constant.
NOTICE
► The ventilator continues to run when the temperature regulator has switched
the heating element off . The appliance thus circulates the air in the room
and so determines optimally, if the room. has cooled
has 4 positions and switches the ventilator and the
= Appliance switched off
= only ventilator
= Ventilator and heating level 1
= Ventilator and heating level 2
3
is at position 0 (off ).
2
to the desired operating mode.
2
3
fi rstly to the Max position.
3
anti-clockwise until a slight click sound is heard.
is steplessly adjustable.
3
to the
PHG 3000 B2